Jib cranes

Model range

Pillar jib crane with a 270° angle of rotation and manual slewing KKR2

Pillar jib crane with a 360° angle of rotation and manual slewing KKR3

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t 5,0 t 6,3 t 8,0 t 10,0 t 12,5 t 16,0 t

Pillar jib crane with a 270° angle of rotation and the electric slewing drive KKM6

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t 5,0 t 6,3 t 8,0 t 10,0 t 12,5 t 16,0 t

Pillar jib crane with a 270° angle of rotation and the electric slewing drive KКМ7

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t 5,0 t 6,3 t 8,0 t 10,0 t 12,5 t 16,0 t

Wall jib crane with manual slewing KKR1

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t

Wall jib crane with electric slewing drive KKM5

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t

Pillar jib crane double-arm and with the manual slewing KKR4

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t 5,0 t 6,3 t 8,0 t 10,0 t 12,5 t 16,0 t

Wall jib crane double-arm and with the manual slewing

Double-girder console crane on column KKM7

0,125 t 0,250 t 0,5 t 1,0 t 2,0 t 3,2 t 5,0 t 6,3 t 8,0 t 10,0 t 12,5 t 16,0 t

About the product

The "Gruzopodyem" plant has been manufacturing two types of jib rotary cranes for more than 15 years: a pillar jib crane and a wall jib crane. This type of crane can have a manual (operating mode A2 according to ISO 4301/1) or electric (operating mode A4 according to ISO 4301/1) drive for turning the console. The crane with a manual drive is controlled by a drawbar or by a load, the rotation of the boom of the jib crane with an electric drive is carried out by means of a gear motor. Both types of crane are equipped with a manual or electric hoist. The equipment is successfully operated indoors (placement category U3), under a canopy (placement category U2) and outdoors (placement category U1) in one of the following climatic versions: from -10 to +40°C, from -20 to +40°C and -40 to +40°C. Other characteristics are discussed individually.

Main characteristics of the manufactured jib cranes:

They are used for lifting and moving any cargo weighing up to 16.0 tons
They are divided into two main types: pillar jib crane, wall jib cranes
Pillar jib cranes are mounted on a concrete foundation by means of a support flange and anchor bolts, wall cranes are attached to a building column or to a wall
Cranes consist of a console (boom), a hoist (load lifting mechanism) and a column (only pillar jib crane)
For electric cranes, the current supply is carried out by default using an electric cable, which can be ordered optionally in the delivery package (if there is an electric drive for turning the boom)
The electric jib crane is controlled by a cable remote control with an emergency stop button. It is possible to set the radio control option for remote control. Turning the boom of hand cranes is carried out by means of a drawbar, lifting, lowering the load either manually or with the help of an electric mobile hoist and a control panel
The mechanism for lifting and moving the load is a hoist (tal), which moves along the boom of the crane
To increase the reliability, safety, and convenience of operation, it is recommended to install additional options that meet the operating conditions of the crane. The manager will help you choose the optimal kit
The advantage of cantilever cranes over overhead cranes is the convenience of working in a limited working area, ease of installation, no need to provide crane tracks
Pillar jib cranes are often used for operation on the street, outside the room, which increases the scope of their application.

Cranes can be stationary or mobile. Fixed jib cranes are attached to the foundation with anchor bolts. Only a wall travelling jib crane that moves along one-way crane tracks can be mobile. At the same time, the boom of the wall travelling jib crane is non-rotating. The cost of the jib crane is affected by its characteristics, the price of the hoist and additional options.

In this regard, the cost of the crane is calculated individually on request. For a manual jib crane, the price will be lower than the electric one, since its configuration is simpler. It is more expedient to purchase a jib crane with a manual drive if its load capacity does not exceed 3.2 tons.

Our company manufactures manual rotary cranes of the following models and their corresponding markings:
- KKR1 is a wall jib crane with a 180°console rotation angle.
- KKR2 - pillar jib crane with an angle of rotation of the console 270°.
- KKR3 - pillar jib crane with a 360°console rotation angle.
- KKR4 - pillar jib crane double-arm with a rotation angle of the main boom 180° and auxiliary 300°.

Our company manufactures electric jib cranes of the following models and their corresponding markings:
- KKM5 is a wall jib crane with a 180°console rotation angle.
- KKM6 - pillar jib crane with a console rotation angle of 270°.
- KKM7 - pillar jib crane with an angle of rotation of the console 360°.
- KKNP - wall travelling jib crane.

In addition, we produce special stationary jib cranes of non-standard design, designed to solve specific Customer tasks. More information about them can be found on the profile pages of the site. These rotary cranes can be equipped with both a manual and an electric drive for turning the console, depending on the requested characteristics. Our factory has all the permits for the manufactured equipment. In addition to the production of jib cranes, we provide services for the delivery and installation of equipment at the Customer's enterprise.

If you are interested in a jib crane, its price, the possibility of installation and the terms of purchase-call the phone numbers listed on the website. You can also use the Order a Call service so that our specialists will contact you as soon as possible.